Cleaning Laser Lenses

Features of cleaning laser lenses

1. No chipping, not easy to crack

Imported quartz crystal material, uniform texture, high mechanical strength, high temperature and pressure resistance, the lens is not easy to crack the edge.

2. High temperature resistance, strong laser resistance

The lenses are made of excellent substrates with excellent optical properties and good thermal stability, and are processed with high precision through cutting, polishing and grinding processes. The lenses are high temperature resistant and have strong laser resistance.

3. High transmittance, strong anti-slag

Both sides of the lens are coated with a high damage threshold transmissivity film to reduce the loss caused by reflection, and the coating makes it safe from splashes and other hazards and has a long life.

4. Safe and easy to use, no hand injury

Humanized 45°protective full-angle design is easy to apply and does not hurt your hands.

Hot specifications are as follows

We can provide lenses for any wavelength according to customer requirements. For other wavelengths, diameters and thicknesses of lenses, we can also produce them on request.

Laser lens wipe steps

1. Wash your hands well and blow dry or leave to dry.

2. Put on the finger glove.

3. Gently remove the lens and inspect it.

4. Blow off the dust on the surface of the lens with an air ball or nitrogen gas.

5. Remove the residue with a cotton ball soaked with lens cleaning solution.

6. Gently wipe the lens with the appropriate amount of wiping solution on the wiping paper, do not wipe in a rotating manner.

7. Replace the wipe paper and repeat step (6), do not reuse the same wipe paper.

8. Use the air ball to blow the mirror surface clean again.

Parameters of cleaning laser lenses