Laser cutting machine daily use and maintenance tips

In order to ensure the normal use of the laser cutting machine, daily maintenance and maintenance must be carried out on the equipment. Once you master the operation essentials of the equipment, you can easily cut the desired workpiece effect and prolong the life of the laser cutting equipment. The following are some daily use and maintenance tips.

First of all, the laser is the core equipment in the laser cutting machine, which provides the cutting light source for the laser cutting machine; in order to ensure the normal and high-quality work of your laser cutting machine, ensure the reliable operation of your laser and prolong the service life of the laser, we remind you Regular inspection and maintenance of your laser. Fiber lasers are basically maintenance-free. In addition to ensuring that the surrounding area is clean, the main daily observations are whether the cooling water is normal and the voltage is normal. If there is any abnormality, please contact Suntop laser engineers for technical consultation in time.

Second, pay attention to the maintenance and maintenance of the lens. Do not touch optical surfaces such as focusing mirrors, protective mirrors, and QBH heads directly with your hands to prevent scratches or corrosion on the mirror surfaces. It is strictly forbidden to use water, detergent, etc. to clean the surface of the optical lens. The surface of the lens is coated with a special film. If you use these to clean the lens, it will damage the surface of the lens. Do not place the lens in a dark and humid place, as this will age the lens surface. When installing or replacing reflectors, focusing mirrors and protective mirrors, do not use too much pressure, otherwise it may cause deformation of the lens and affect the quality of the beam.

Third, pay attention to the maintenance of laser cutting machine tools. Before the machine is put into operation, the machine must be lubricated carefully according to the lubrication instructions. Professional lubrication with the most suitable lubricant is a prerequisite for maintaining the quality of the machine tool and thus avoiding malfunctions and their consequences.

If the machine tool has not been used for a long time, the lubrication of the entire machine tool must be checked. In addition, when the machine tool is not in use for a long time, please apply butter to the moving parts of the machine tool and wrap them with anti-embroidery paper. For other parts, check whether there is rust regularly, and perform rust removal and anti-rust treatment on the rusty parts (such as If conditions permit, a dust cover can be added), and the machine tool should be cleaned and inspected regularly.

Fourth, the entire equipment must be thoroughly cleaned daily at specified time intervals. Obvious dirt can be scrubbed after shutting down the machine, or vacuumed with an industrial vacuum cleaner. Filling and drain ports should always be kept clean. Wipe the sump and lubrication points with a lint-free cloth.

In order to ensure the normal use of your equipment and prolong its life, please be sure to read the instruction manual and maintenance instructions carefully, and operate in accordance with the operating specifications. Please carefully implement the daily maintenance and maintenance steps in the user manual to ensure better and better long-term operation of the laser cutting machine.