Floor Type Fiber Laser Marker for Metal

In modern manufacturing, laser marking technology is widely used for its high precision, high efficiency and environmental protection, and has become an ideal choice for identification, tracking and brand protection in many industries. Fiber laser marking machine is an important form of laser marking technology. It uses fiber laser source for marking. Its laser beam has excellent focusing performance and extremely high energy density, and can achieve fast and accurate marking on a variety of materials.

In the design and application of laser marking machine, safety and ease of operation are two crucial considerations. Although traditional open laser marking machines are easier to operate in some cases, there are safety hazards such as laser radiation, dust and gas emissions during their use. In order to solve these problems, floor-standing fully enclosed fiber laser marking machines came into being.

Improved safety: The fully enclosed design effectively blocks the leakage of laser beams, greatly reducing the risk of safety accidents caused by misoperation. In addition, the enclosed environment can avoid direct contact between laser and air, reducing potential harm to operators.

Environmental protection: Smoke and harmful gases may be generated during the marking process. The enclosed design limits these pollutants to the inside of the equipment and can be equipped with a smoke exhaust system for treatment, thereby protecting the operating environment and the health of workers.

Improve work efficiency: The floor-standing design can optimize the operation process, centrally control all functions, and enable operators to complete the marking work in a closed space, reducing movement and time waste during operation, and improving overall work efficiency.

Reduce noise and vibration: The fully enclosed design helps to isolate the noise and vibration generated by the operation of the equipment, thereby providing operators with a more comfortable working environment, reducing fatigue and improving production efficiency.

Aesthetics and space utilization: The floor-standing design occupies space independently, which not only saves the flexibility of the workshop layout, but also has a neat and beautiful appearance, which conforms to the image of a modern factory.

In summary, the floor-standing fully enclosed fiber laser marking machine combines advanced technology with humanized design, which not only improves production safety and effectiveness, but also meets the requirements of modern enterprises for environmental protection and employee health. Through such innovative design, the application of laser marking machines in the manufacturing industry will be more extensive and mature.

The basic principle of fiber laser marking machine is mainly based on the generation, transmission and interaction of laser with materials. The following is a detailed description of the working principle of fiber laser marking machine:

1. Laser generation

The core component of fiber laser marking machine is fiber laser generator. Its working process mainly includes the following steps:

Fiber amplification: The excitation light source (such as laser diode) is introduced through the gain medium in the fiber laser (usually erbium-doped or gallium arsenide-doped). These laser diodes emit photons into the optical fiber, and the doped materials in the optical fiber are excited and release photons. This process is called fiber gain.

Laser oscillation: The photons in the gain medium interact with each other through the reflection and gain of the optical fiber to form coherent light. Under certain conditions, when the photons pass through the optical fiber, excitation occurs and a powerful laser is formed.

2. Laser transmission

Fiber transmission: The generated laser is transmitted through the optical fiber. The optical fiber of the fiber laser marking machine usually has excellent transmission efficiency and low loss, and can deliver the laser to the processing head with high quality and intensity.

3. Laser focusing

Optical system: The laser is focused through optical elements such as focusing lenses to gather the beam into a small spot. By adjusting the focal length, the energy of the laser forms an extremely high power density on the surface of the material, which can instantly heat the material. The focusing effect of the laser is a key factor in ensuring the accuracy of the marking.

4. Material interaction

When the laser beam is irradiated on the surface of the material, its energy will cause the following phenomena:

Surface evaporation: For some materials, such as plastics or coatings, the high temperature of the laser can quickly evaporate the surface material to form a mark.

Melting and solidification: For materials such as metals, the laser energy causes them to melt locally, cool rapidly and solidify again, leaving a permanent mark.

Color change: In some cases, the thermal reaction between the laser and the material will cause a change in color, forming a contrasting mark.

5. Control system and motion mechanism

Fiber laser marking machines are usually equipped with high-precision CNC systems and motion mechanisms. Through the drive system, the laser head can move in two-dimensional or three-dimensional space, combined with a computer-controlled marking program, to quickly and accurately complete the engraving of various patterns, texts, barcodes, etc. on the surface of the material.

The basic principle of fiber laser marking machine is to generate and transmit laser through optical fiber, and use the interaction between laser and material to achieve marking. Its high efficiency, high precision and flexible adaptability make it widely used in modern industrial production. Whether in the fields of electronic components, metal products, plastic parts or medical equipment, fiber laser marking machine has shown its unique advantages.

Floor Type Fully Enclosed Fiber Laser Marking Machines are highly efficient and accurate marking equipment used in a wide variety of industries. Its unique features make it highly sought after in the market.

1. Fully enclosed design, in line with European CE standards, equipped with laser protection glass observation window, easy and safe to operate.

2. Using high-quality light source, good spot quality, uniform optical power density, stable output optical power, and precise machining can be realized.

3. The built-in red light in the scanning head is used to preview the marking position, making it easier and more accurate to find the laser focus.

4. The marked text, pattern and other information are clear and permanent, without fading or falling off.

5. The elector-optical conversion efficiency can reach more than 28%, saving energy and electricity. Non-contact marking, no pollution, no noise, very environmentally friendly.

6. The auto-focus function can adjust the height of the laser focus according to the products of different heights on the workbench.

Compared with traditional open equipment, floor-standing closed laser marking machines have many advantages. The following is a detailed introduction to their main advantages:

1. High safety

Safety protection: Due to the closed design, the laser beam generated during the laser marking process will not cause harm to the operator or surrounding personnel. This design effectively reduces occupational safety risks and protects the operator's eyes and skin.

Dust and pollution prevention: The closed structure can prevent external dust, oil and other pollutants from entering the equipment, maintaining the long-term stability and operating efficiency of the equipment.

2. Improve processing accuracy

Strong stability: The closed body can reduce the impact of external environmental changes on the laser marking process, such as temperature and humidity fluctuations. This helps to ensure the consistency and stability of the marking quality, especially in application scenarios with high precision requirements.

Reduce vibration interference: The floor-standing closed design can effectively reduce the impact of vibration that may be generated by the equipment during operation on the marking accuracy.

3. Easy operation

Integrated design: Closed laser marking machines usually integrate multiple functions, such as autofocus, laser output adjustment, etc., making operation easier and reducing the time for setting up and debugging.

4. Strong environmental protection

Reduce exhaust gas and waste emissions: It can effectively control the smoke and harmful gases generated during the marking process and reduce pollution to the environment. At the same time, a more environmentally friendly production process can be achieved through a proper ventilation system.

Low noise: Compared with some traditional marking methods, such as mechanical engraving, laser marking has relatively low noise, and the closed design can further isolate the noise and improve the working environment.

5. Space saving

Efficient space utilization: Because its design is usually floor-standing, it can effectively utilize the space of industrial plants and optimize the layout of the work area. At the same time, its volume is usually smaller than traditional equipment, and it is more suitable for workshops with limited space.

6. Improve production efficiency

Accelerate production cycle: It can achieve high-speed and efficient marking, greatly shorten the production cycle, and meet the needs of mass production.

Floor-standing closed laser marking machine has become an important equipment in modern industrial manufacturing due to its high safety, stability, easy operation and environmental protection. This advanced marking technology not only improves the quality and efficiency of marking, but also has been widely used in many industries. Click here to contact Suntop Laser now for more details.

Suitable for working with most metal marking applications such as gold, silver, stainless steel, brass, aluminum, steel, Iron titanium etc., and can also mark on many nonmetal materials, such as ABS, Nylon, PES, PVC etc.

Choosing the right laser marking machine involves multiple factors. Depending on your specific needs, budget, and application scenarios, here are some important considerations:

1. Marking material

Material type: Understand the material you need to mark (such as metal, plastic, ceramic, glass, wood, etc.). Different laser types are suitable for different materials.

Material properties: Consider the hardness, gloss, thickness, and texture of the material, which will affect the choice of laser.

2. Laser type

CO2 laser: Suitable for marking and engraving non-metallic materials (such as wood, organic matter, plastic, glass, etc.).

Fiber laser: Suitable for marking metal materials (such as stainless steel, aluminum, copper, etc.), with higher efficiency and depth.

UV laser: suitable for marking heat-sensitive materials, such as certain plastics and glass, with higher precision and smaller heat-affected zone.

3. Marking accuracy

Resolution: Choose the appropriate resolution based on the clarity of your product's marking.

Marking speed: Choose the appropriate marking speed based on production efficiency requirements. Some machines may need to trade off between speed and accuracy.

4. Marking content

Text, image, QR code: confirm the type of content you need to mark, select a machine that can meet your needs, and ensure that the required format is supported.

Customization requirements: consider whether customized services are required, such as serial number, batch number, marking on QR code, etc.

5. Work area

Working area: ensure that the machine's working area is large enough to accommodate your products. For larger products, you need to choose a machine with a large workbench.

Degree of automation: understand whether the machine supports automated feeding and discharging systems to improve production efficiency and reduce labor costs.

6. Software and operation

Operation interface: confirm that the software is easy to use and whether it supports Windows or other operating systems to facilitate the operator's operation.

Design software: ensure that the laser marking machine is equipped with or compatible with design software that can support multiple file formats and flexible editing functions.

7. Safety

Protective measures: ensure that the equipment has necessary safety protection measures, such as laser protective cover, to avoid accidental injuries during operation.

Operation specifications: be familiar with the instructions for use and safety protection requirements, and select equipment that meets relevant safety standards.

8. After-sales service and maintenance

Manufacturer reputation: Choose laser marking machines from well-known manufacturers, considering their reputation in the industry and user feedback.

Warranty and technical support: Understand the warranty period and subsequent technical support provided by the supplier to ensure timely assistance when the equipment fails.

9. Budget

Cost control: Consider different levels of equipment according to your budget and choose a laser marking machine with the best cost-effectiveness.

Operating costs: Evaluate the consumables, maintenance costs and power consumption of the equipment to control long-term operating costs.

10. Application and industry standards

Industry standards: Some industries (such as medical, food, etc.) may have special requirements for labeling. Please ensure that the equipment meets relevant standards and regulations.

When choosing a laser marking machine, you need to consider the above factors comprehensively to ensure that the selected equipment meets your specific needs and can improve efficiency and quality in the production process. Click here to contact Suntop Laser today for a demo or sample marking results to make a more informed choice.

There are many reasons to choose Suntop Laser as a supplier of laser marking machines or laser processing equipment.

Based on the above points, Suntop Laser can become a trustworthy laser marking machine supplier, meeting customer needs in terms of quality, performance and service, thereby helping customers improve productivity and product quality. If you are interested, it is recommended to contact Suntop Laser directly for more details and technical parameters to make a more informed choice.

1. How can i place an order?

Please provide the details of your requirements as clear as possible. So we can send you the offer at the first time.

For further discussion, it is better to contact us with WhatsApp / WeChat / email / phone, in case of any delays.

2. What kind of display we provide?

We have laser marking machine / laser welding machine / laser cutting machine / laser cleaning / CO2 laser cutting and engraving machine / laser accessories for you choose.

3. How about the warranty?

We have 2 years warranty and lifelong maintenance

4. What is your terms of delivery?

We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost effective for you.

5. Is the machine difficult to operate?

No, it is very simple to operate. The user-friendly operation interface and software make the operation relatively simple. Most devices support graphic file import, and users only need to simply learn the basic operation of the software and the daily maintenance of the equipment.

6. How is the speed and accuracy of marking?

It has high marking speed and accuracy, and the specific performance depends on the configuration of the machine. Fiber laser marking machines usually have higher speed and accuracy when marking metals, while CO2 laser marking machines perform well on non-metallic materials.

7. What should be paid attention to in maintenance and care?

In order to ensure the stable operation of the equipment, regular maintenance is necessary. The main points to pay attention to include:

Clean the laser and reflector regularly to ensure that the optical path is clean.

Check the circuit and connecting wires to ensure that the equipment is not short-circuited or damaged.

Check the cooling system regularly to ensure that the laser temperature is normal.

Update the software and firmware to ensure that the equipment uses the latest functions.

8. How long is the service life of the equipment?

The service life of the equipment varies depending on different models and usage environments. Generally, high-quality laser marking machines can be used for several years under normal maintenance. The service life of the laser is generally 100,000 hours.

9. Can the machine be customized?

Yes, the equipment can be configured according to the customer's specific needs, such as working area, laser type, software functions, etc. When choosing a supplier, ask about its customization capabilities and experience.