● The wire feeder with touch capacitive screen has high wire feeding accuracy.
● 220V drive, automatic wire feeding, more powerful wire feeding, smooth wire feeding without wire jamming.
● Multi-functional control panel, various parameters and processes can be adjusted.
● The diameter range of the welding wire of the wire feeder: 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm.
● Automatic wire feeding device, good repeatability and high work efficiency.
1. Stable welding quality
The wire feeder sends the welding material to the welding mechanism in turn through the wire feeding hose, so that the welding torch can find the welding seam at the correct position and realize automatic filling. Through intelligent filling, the weld seam is beautiful and the quality is up to standard. The operator can adjust the wire feeding speed and direction of the wire feeding mechanism according to the welding quality and welding process. Choosing a reasonable wire feeding direction is also an important step to stabilize the welding quality.
2. Improve work efficiency
The wire feeder can realize automatic welding according to the welding instruction. After the intelligent control system issues instructions, the automatic wire feeder feeds the welding wire into the wire feeding mechanism. The automatic placement of welding materials can reduce the system reaction time, and the automatic wire feeder realizes quick response and improves work efficiency.
3. Reasonable wire feeding method to achieve cost control
There are many wire feeding methods for automatic welding equipment. In order to achieve a stable wire feeding process, users need to choose according to the workpiece material, welding parameters, and welding wire type.
Suntop wire feeder specifications | |
Wire feeding type | Automatic |
Wire feed delivery length | 3m/5m optional (9.8ft/16.4ft) |
Interface | Low voltage enable signal line |
Wire feeding speed range | 40-600 cm/min (15- 230 ipm) |
Compatible wire diameter | 0.8 mm (0.031 inch), 1.0 mm (0.039 inch), 1.2 mm (0.047 inch), 1.6 mm (0.063 inch), 1.8 mm (0.071 inch), 2.0 mm (0.079 inch) |
Wire reel capacity | 1 kg (2 lbs), 5 kg (10 lbs) or 10 kg (25 lbs) by shaft change |
Compatible wire materials | Steel, stainless steel, aluminum |
Power requirement | 220V 50/60Hz |
Wire feed unit weight | 22 kg (48.4 lb) |
Wire feeder unit dimensions (L*W*H) | 560mm (22.0 inches) x 250mm (9.8 inches) x 360mm (14.2 inches) |
content is empty!