Details Product Parameters Samples Video
1. The laser not only has a good beam quality, but also has a smaller focal spot, which enables ultra-fine marking; the scope of application is wider.
2. Small focal spot, small processing heat-affected zone, can be used for ultra-fine marking and special materials marking. It is the first choice for customers who have high requirements on marking effect.
3. The heat-affected area is extremely small, which will not produce thermal effect and the problem of material burning will not occur.
4. Adopting built-in laser diode technology to avoid the effect of fibre jitter on the output laser.
5. High photoelectric conversion rate, beautiful marking and engraving effect, good tactile feeling, high anti-counterfeiting effect.
6. Can be integrated in the production line, marking production date, S/N number, etc.
1. Laser
The core component is the laser, which is responsible for generating a high-power, high-stability laser beam, allowing the laser beam to perform marking operations with higher speed and accuracy.
2. Laser scanning galvanometer
The optical scanning galvanometer is also the core component of the laser marking machine. It is mainly used for rapid and precise positioning of the beam. The performance of the galvanometer determines the accuracy of the marking machine.
3. Focus system
The focusing system focuses the parallel laser beam on a point, mainly using f-θ lens (also called field lens). Different field lenses have different focal lengths, and the marking effects and ranges are also different. You can choose according to your own products and required marking range. Matching mirror model.
4. Laser power supply
The input voltage of the laser power supply is AC220V. There is a switching power supply for the peripheral of the small computer, which is convenient for portability, emergency stop, etc.
5. Marking software
The laser processing system is combined with computer numerical control technology to form an efficient automated processing equipment that can print various texts, patterns, symbols, one-dimensional codes, two-dimensional codes, etc. It is easy to use software to design marking patterns, change marking content, and adapt to modern production. High efficiency and fast pace requirements.
6. Computer control system
It is the control and command center of the entire laser marking machine, and is also the carrier of software installation. The workpiece marking process is completed through the coordinated control of the acousto-optic modulation system and the galvanometer scanning system.
● High-precision engraving capability: Using laser beam for engraving, it has very high engraving accuracy. It can achieve fine engraving lines and precise patterns, and is suitable for high-precision, detailed engraving on glass materials.
● Multifunctional application: A variety of engraving and marking effects can be achieved. It can engrave text, patterns, images and other special features, and has a wider range of applications to meet different needs.
● Safety and environmental protection: The laser engraving process does not require the use of chemical solvents, and does not produce waste gas or noise. Therefore, the glass laser engraving machine is safe and environmentally friendly.
● High energy consumption ratio: It has high energy utilization efficiency. Compared with traditional mechanical engraving methods, it can save energy and reduce operating costs.
● Automation and intelligence: Equipped with an automated control system, it can realize automated operation and intelligent management. Operators can complete complex engraving and marking tasks with simple settings and instructions, improving work efficiency.
● High stability and reliability: Using stable laser technology and high-quality engraving head, it has high stability and reliability. It can run stably for a long time, ensuring the stability of engraving quality and work efficiency.
It is suitable for almost all materials. Widely used in metal (all metals such as iron, copper, aluminum, magnesium, zinc, etc.), glass, crystal, PCB, plastic, fiber, paper, paint, silicon wafer, LCD, polyamide, wire, plug and other polymer materials.
Especially suitable for the high-end market of ultra-fine processing, skin care cosmetics, medical drugs, food, silicon wafer micro-hole, blind hole processing, glass products, metal products, plastic buttons, electronic components, gifts, communication equipment, building materials, etc.
Model | ST-UV03 | ST-UV05 |
Laser Power | 3W | 5W |
Max. marking range | 110*110mm | 150*150mm |
Output power | >3W@30KHZ | >5W@40KHZ |
Maximum pulse energy | 0.1MJ@30KHZ | 0.12MJ@40KHZ |
Pulse duration | <15NS@30KHZ | <18NS@40KHZ |
1/e2 beam diameter at output | 0.7mm | 0.8mm |
Laser Type | UV laser | |
Laser source | GAIN （JPT and other brand optional） | |
Control Software | EZCAD | |
Cooling Mode | Water Cooling | |
Beam diameter | ≤ 10mm | |
Working Accuracy | ±0.002MM | |
Marking Speed | 1-12000mm/s | |
Repetition Frequency | 20-100KHz | |
Laser Wavelength | 355nm | |
Minimum Font for Marking | 0.01mm | |
Working Voltage | 220V+10% 50/60 Hz | |
Graphic Format Supported | AI, PLT, DXF, BMP, DST, DWG, DXP | |
Applicable Material | all metal material and all non metal material | |
Spare Parts Come with the Machine | Protective glasses, Metal business card, Foot switch, Hex socket wrench, Power cord | |
Optional Accessories to Purchase | D80 Rotating Shaft/ D57 Small Chuck/2D Table (X.Y direction)/ Cutting Fixture | |
Net Weight (KG)/ Gross Weight | 150KG / 180KG | |
Packaging Dimension | 1160mm*900mm*1680mm (L*W*H) | |
content is empty!