Details Product Parameters Samples Video
● Adopt high quality light source, good spot quality, uniform optical power density, stable output optical power, can realize precision processing.
● Adopting high-precision brand-name wavelength F-theta lens, which can realize high-speed and high-precision laser marking, and the text and image will not be distorted in long-term use.
● Scanning head built-in red light for previewing the marking position, easier and more accurate to find the laser focus.
● Electro-optical conversion efficiency is very high, reaching more than 30%, low cost of use, power saving and energy saving.
● Scanning head built-in red light for previewing the marking position, easier and more accurate to find the laser focus.
● The machine can be equipped with other optional accessories according to the actual product laser marking needs of customers, such as rotary device, 2D/3D worktable, pen rotary table and other fixtures.
1. Laser
The core component is the laser, which is responsible for generating a high-power, highly stable laser beam, enabling the laser beam to perform marking operations at higher speeds and with greater precision.
2. Laser Scanning Mirror
Optical scanning oscillator is also the core component of the laser marking machine, mainly used in the rapid and accurate positioning of the beam, the performance of the oscillator determines the accuracy of the marking machine.
3. Focusing system
Focusing system will focus the parallel laser beam on one point, mainly using f-θ lens (also called field lens), different field lens focal length is different, marking effect and range is not the same, according to their own products and need to mark the range of optional field lens model.
4. laser power supply
Laser power supply input voltage of AC220V AC small machine with a switching power supply, easy to carry, emergency stops.
5. marking software
Laser processing system combined with computer numerical control technology, constitute a highly efficient automated processing equipment, can play a variety of text, patterns, symbols, one-dimensional code, two-dimensional code, etc., easy to use the software design marking pattern, change the marking content, to adapt to the modernization of the production of high-efficiency, fast-paced requirements.
6 computer control system
This is the whole laser marking machine control and command center, but also the carrier of software installation. Through the sound and light modulation system, galvanometer scanning system coordinated control to complete the workpiece marking processing.
1. High precision: Using laser beam for marking, it has very high precision. It enables clear marking of tiny patterns, details and text, suitable for precise and delicate applications.
2. Non-contact: Using non-contact marking method, the laser beam acts directly on the surface of the workpiece without physical contact, reducing the risk of damage and deformation of the workpiece.
3. Multi-material adaptability: can be marked on different materials, including metal, plastic, etc. Different materials require different laser sources and parameters, and the laser marking machine can adapt to different materials by adjusting the parameters.
4. High-speed marking: It can mark quickly and the marking speed is relatively high. In particular, fiber laser marking machines have faster marking speeds and improved production efficiency while ensuring marking quality.
5. Long life and stability: The laser source has a long life and can continue to operate stably. Because the fiber laser marking machine uses optical fiber to transmit the laser beam, it can better maintain and protect the laser source and extend its service life.
6. Flexibility: A variety of marking methods can be performed, including scoring, cutting, punching, engraving, etc. At the same time, the laser marking machine can also mark various patterns such as QR codes, barcodes, images, and text.
7. Environmentally friendly: Using light beams for marking, no chemicals are needed, no waste gas, waste water or waste liquid is produced, and it meets environmental protection requirements.
Suitable for working with most metal marking applications such as Gold, Silver, Stainless Steel, Brass, Aluminum, Steel, Iron Titanium etc., and can also mark on many nonmetal materials, such as ABS, Nylon, PES, PVC etc.
Widely used in integrated circuit chips, computer parts, industrial bearings, clocks and watches, electronic and communication products, aerospace devices, a variety of automotive parts, home appliances, hardware tools, molds, wires and cables, food packaging, jewelry, tobacco, as well as military affairs, and other areas of graphic and text marking, as well as high-volume production line operations.
Laser Power | 20W | 30W | 50W | 60W |
Model | ST-FL20P | ST-FL30P | ST-FL50P | ST-FL60P |
Max Marking Range | 110*110mm /150*150mm | 200*200mm | 300*300mm | 450*450mm |
Depth of Single Marking | 0.01mm | 0.03mm | 0.06mm | 0.07mm |
Same pattern marking efficiency | 10s | 7 s | 4s | 3s |
Whole Machine Power | 600W/h | 800W/h | 1000W/h | 11000W/h |
Laser Type | Fiber Laser | |||
Laser Source | MAX Brand （ Raycus can choose ) | |||
Control Software | EZCAD | |||
Cooling Mode | Air Cooling | |||
Working Accuracy | ±0.002MM | |||
Marking Speed | 0-7000mm/s | |||
Repetition Frequency | 20-100KHz | |||
Laser Wavelength | 1064nm | |||
Minimum Font for Marking | 0.15mm | |||
Working Voltage | 220V±10% 50/60 Hz | |||
Graphic Format Supported | AI, PLT, DXF, BMP, DST, DWG, DXP | |||
Applicable Material | All metal (Stainless steel, Carbon steel, Brass,etc.) and some plastic(ABS, PVC,PES, ETC.) | |||
Spare Parts Come with the Machine | Protective glasses, Metal business card, Foot switch, Hex socket wrench, Power cord | |||
Optional Accessories to Purchase | D80 Rotating Shaft/ D57 Small Chuck/2D Table (X.Y direction)/ Cutting Fixture | |||
Net Weight (KG)/ Gross Weight | 38KG / 50KG | |||
Machine Dimension | 420*300*550mm (L*W*H) | |||
content is empty!