Publish Time: 2023-08-04 Origin: Site
How to use the laser welding machine correctly? Many manufacturers do not pay much attention to this problem when purchasing machines, and regret it only when there is a problem with the machine. The price of a laser welding machine is not cheap, and many accessories are easily damaged when the laser welding machine is used improperly, so in many cases, we may save a lot of cost for the company by paying a little attention when using it. Suntop laser Let's learn how to use the laser welding machine correctly.
1. Before starting the laser welding machine, check whether the power supply and water circulation are normal, and at the same time check whether the gas connection of the equipment in the machine is normal, and check whether there is dust or oil on the surface of the machine.
2. It is necessary to check the welding quality during the welding process, which is mainly to check the quality of the processed parts.
There are usually two inspection methods: one is destructive inspection, and the other is visual inspection. The former inspection method is more scientific, and it can tear the welding base metal for confirmation. The latter is based on the work experience of the staff to judge whether the welding product is qualified.
3. If the laser welding is found to have welding quality problems through inspection, the reason should be analyzed according to the phenomenon. After determining the cause, check the corresponding parts to repair and correct.
4. Strengthen the daily management of the laser welding machine. During the laser welding process, the welding pressure should be tested frequently to ensure that the welding pressure is stable. At the same time, it is also necessary to check the condition of the welding joint. In addition, current control needs to be strengthened to prevent current overheating caused by power and voltage fluctuations and laser welding overload.
5. After the work is completed, exit the program first, then turn off the laser generator, turn off the water cooler and other equipment in order, turn off the valve of the argon gas cylinder, and finally turn off the main power switch.
The above are the precautions for the operation of the laser welding machine. In practical applications, some minor faults may often be encountered. In view of this kind of situation, it is a warm reminder that it is best to go to work after training when using laser welding equipment. For more knowledge about laser welding, please consult our Suntop professional sales or technical engineers, and we will serve you wholeheartedly.