Details Product Parameters Samples Video
● Using Mopa laser, the spot quality is good, the optical power density is uniform, and the output optical power is stable.
● The pulse width is adjustable and the frequency range is wider, making the marking effect more precise.
● The equipment adopts air-cooling technology, which does not require the support of a water-cooling system and has a longer service life.
● Adopt red light positioning system, easy positioning and high positioning accuracy.
● Parameters can be flexibly adjusted and can be used for basic marking, stainless steel color marking, anodized aluminum black marking, and other metal high contrast marking without damaging the material surface.
● Suntop fiber laser marking machine has undergone strict aging tests and can work continuously for 24 hours.
1. Laser source
Using Mopa laser, it has a larger pulse width adjustment range and faster response speed. Frequency adjustable range up to 1-4000KHz.
2. High quality galvanometer
The high-speed digital galvanometer scanning head has good running stability and high positioning accuracy, which can realize high-speed marking and high precision.
3. F theta lens
Smart F theta lens, through which the fiber laser beam is focused to the workpiece surface, the energy is sufficient.
4. Control System
High-performance, high-reliability EZCAD control system, simple operation and higher stability.
1. Greater flexibility: By adjusting parameters such as pulse width, frequency and power, MOPA laser marking can achieve more flexible marking effects, such as variable depth marking, yin and yang marking, color changes, etc.
2. Better marking control: It can achieve precise control and is very suitable for marking tasks that require high details. It can produce high-precision, high-quality marking effects such as small fonts, fine patterns and complex lines.
3. High-speed marking: Using special pulse width adjustment technology, it can achieve high-speed marking to a certain extent. This improves production efficiency and is suitable for mass production needs.
4. Adjustable shallow engraving depth: The engraving depth can be adjusted as needed. Compared with traditional laser marking technology, it can achieve a shallower marking depth, which is suitable for some applications that need to display texture and details.
5. Easy to control and operate: MOPA laser marking equipment is usually equipped with a simple control system and user-friendly operating interface, making it easy to control and operate. Users can achieve the desired marking effect through simple settings and adjustments.
Suitable for working with most metal marking applications such as Gold, Silver, Stainless Steel, Brass, Aluminum, Steel, Iron Titanium etc., and can also mark on many nonmetal materials, such as ABS, Nylon, PES, PVC etc.
It is widely used in 3C electronics, medical devices, auto parts, electronic components, integrated circuits (IC), instruments, electrical appliances, hardware products, building materials, glasses and clocks, jewelry and ornaments, craft gifts and other industries.
Laser Power | 20W | 30W | 50W | 60W |
Model | ST-FL20P | ST-FL30P | ST-FL50P | ST-FL60P |
Max Marking Range | 110*110mm /150*150mm | 200*200mm | 300*300mm | 450*450mm |
Depth of Single Marking | 0.01mm | 0.03mm | 0.06mm | 0.07mm |
Same pattern marking efficiency | 10s | 7 s | 4s | 3s |
Whole Machine Power | 600W/h | 800W/h | 1000W/h | 11000W/h |
Laser Type | Fiber Laser | |||
Laser Source | MAX Brand （ Raycus can choose ) | |||
Control Software | EZCAD | |||
Cooling Mode | Air Cooling | |||
Working Accuracy | ±0.002MM | |||
Marking Speed | 0-7000mm/s | |||
Repetition Frequency | 20-100KHz | |||
Laser Wavelength | 1064nm | |||
Minimum Font for Marking | 0.15mm | |||
Working Voltage | 220V±10% 50/60 Hz | |||
Graphic Format Supported | AI, PLT, DXF, BMP, DST, DWG, DXP | |||
Applicable Material | All metal (Stainless steel, Carbon steel, Brass,etc.) and some plastic(ABS, PVC,PES, ETC.) | |||
Spare Parts Come with the Machine | Protective glasses, Metal business card, Foot switch, Hex socket wrench, Power cord | |||
Optional Accessories to Purchase | D80 Rotating Shaft/ D57 Small Chuck/2D Table (X.Y direction)/ Cutting Fixture | |||
Net Weight (KG)/ Gross Weight | 38KG / 50KG | |||
Machine Dimension | 420*300*550mm (L*W*H) | |||
content is empty!