Product Details Product Parameters Samples Video
The whole equipment realizes the complete independent division of the feeding area of the processing area. Double station automatic turntable feeding, it can be customized according to customer's actual laser welding requirements.
A, Station 1 place the assembled workpiece together with the fixture on the welding station and start the welding. Station 1 is driven by the automatic rotary table and rotated to the robot welding station.
B, At the welding station, the robot will control the welding path to carry out welding processing. At the same time, the workpiece assembly will be completed at the station 2.
C,Repeat the above process.
The whole machine adopts robot arm, the equipment structure is compact, occupies little space, the work is stable and reliable, the operation is convenient.The fiber optic circuit and welding joint are fixed at the end of the robot, and welding is realized through the control of the robot.
By manual control of the robot with its own teaching software, the laser welding requirement of 3d arbitrary graph trajectory can be realized.Prefabricated double station operation, save loading and unloading time, improve the efficiency of equipment.
Fiber optic laser flexible transmission, can ensure the consistency of welding quality requirements, welding joint using the United States LASERMECH or swiss RAYTOOLS company high quality welding joint, narrow slit, good quality.
In order to facilitate teaching programming and simulation operation, this system has the auxiliary function of red light indicating. By observing the movement trajectory of red light, it can judge whether the welding position is correct.
In order to ensure the quality of welding, this system chooses coaxial blowing qigong energy, the blowing switch is automatically controlled by the system, when the external pressure is insufficient, the system alarm prompt and will stop the welding action, to avoid welding waste.Air nozzle easy to change, high finish.
In order to ensure the stability and reliability of the system and avoid signal interference, the following measures are taken to ensure the electrical technology:
1) the layout of main circuit components and control circuit components is divided into blocks and connected to shunt.
2) shielded wire or twisted pair wire shall be selected as the lead of the key control element.
3) the connection between the motor and the driver shall be made by a separate outlet, not in parallel with any other connection.
4) movement control panel, sensor and its connected components may be close to each other.
5) the connection wires of the upper and lower layers of the equipment shall adopt the navigation plug-in connector and the Weidmuller terminal.
Description of product composition, performance parameters and technical scheme
This robot 3D laser welding machine is mainly composed of high-power stabilized voltage power supply, laser, light guide system (laser welding joint), welding working platform and fixture, electrical control system, etc.The details are as follows:
Name | Specification | Q’ty | Original |
Laser Generator | IPG YLR-1000 or RAYCUS 1000W | 1 | Germany/China |
Motion system | ABB 1410 robot arm | 1 | ABB |
Laser welding head | RAYTOOLS | 1 | Swiss |
Control system and cabinet | Touch screen+PLC | 1 | SUNTOP LASER |
Working table | Electric dial system | 1 | SUNTOP LASER |
Welding fixtures | Customized according to the actual products | 1 | SUNTOP LASER |
Laser protection raster | Safety grating and protective room (if required) | 1 | SUNTOP LASER |
Name | Specification or model |
3D laser welding machine | ST-DW500/ST-DW1000/ST-DW1500/ST-DW2000 |
laser Generator | IPG or RAYCUS |
Laser power | 500W/1000W/2000W/3000W/6000W |
Robot arm | ABB Robot (another robot optional) |
Laser welding head | Germany Precitec or Swiss RAYTOOLS |
Control system | Touch screen + PLC |
The welding table | Electric dial system |
fixtures | Customized |
Laser protection | Safety grating and protective room |
content is empty!